- CPE028 is an outdoor high power and high-performance CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter.
- 3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house.
- Low Interference: 5G frequency makes it have better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE; it can automatically adjust to the optimal transmission speed according to the actual signal strength and transmission distance.
- Easy to Connect: It is manageable through the WEB browser interface. Before accessing, please modify the IP address of the computer to the same network segment as the CPE (192.168.0.XXX), which is very important; then enter the IP address of the CPE in the browser, and enter the account password "admin/admin" to access and set.
- Support PoE power supply (50 meters) power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMA/CA, CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, NAT protocol.
Details: Riiai CPE kit is an outdoor high power and high-performance 300Mbps CPE, which works at 5G frequency, supports point to Point and Point to Multipoint wireless connection. It has a better anti-interference performance than the present popular 2.4G products. It is manageable through the WEB interface. Important Tips: CPE 300Mbps high-speed, 5.8GHz frequency, 3km stable transmission, IP65 outdoor waterproof level. 1. The distance "3KM" means 2pcs CPE based on point to point bridge mode，3KM means barrier-free 3KM range, in actual use, 2 CPE installation should be lower than 3KM. 2. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter, so 2pcs wireless bridge will achieve a better signal effect. Specification： DDR: 64Mbyte FLASH: 8Mbyte PoE Power: 12V—24V Antenna: 14dBi directional Physical Ports: 2 10/100Mbps Ports Power LED On ：The power is on/system starts Off： The power is off/system closes Lan LED Off：There is no other device connected to the port On：There is another device connected to the port Blinking：There is data transmission on the port Wireless LED（AP Mode） Off：No wireless connection Blinking：There is wireless data transmission Wireless Signal Strength LED（Client mode） Four signal strength indication LED all lighting up means the signal strength is at the highest level; Four signal strength indication LED all blinking means the signal strength is at the weakest level Operation Temperature: -20~+70 Operation Humidity: 10%~95% RH Package Inlcude 2 x Wireless Bridge 2 x PoE Power Adpter 4 x Tips 1 x User Manual
Package Dimensions: 13.5 x 7.8 x 2.8 inches